New Night Vision Scope Clip-on With HD Audio & Video Recording


Digital FOV, LLC is proud to introduce Digital Crosshairs 1000R-V2. This is the latest night vision clip-on in the Digital Crosshairs 1000 product line. It now includes drone industry HD video and audio recording and playback technology.

This product captures a night vision hunting experience as a HD motion picture with sound. It captures video from your scope and sound onto a Micro SD Memory Card ( supporting up to 32GB) which can be played back on the attached targeting display or on any desktop or mobile device that can read a memory chip.

·* Video compression format: MJPEG
· *Resolution: VGA (640 * 480) / D1 (720 * 480) / HD (1280 * 720)
· * Record file format: AVI
· * Recording sound: ON/OFF selectable
· * Cycle recording time: 10min/20min/30min
· * Frame rate: 30 Frames

This product mounts on any scope in less than one minute without proprietary adapters. No need to re-zero the scope. The included IR illuminator and targeting display mounts using a standard picatinny rail scope adapter that is included in the kit. Just mount it, turn it on, and go hunt. No programming, aps to download or sighting-in required. Now your best Leupold, Vortex, Nikon, Burris, or Schmidt Bender can be used in total darkness at ranges beyond 200+ yards.

The Digital Crosshairs 1000 night vision clip-on product line has a modular design that allow for the integration of the “best available” night vision camera boards, lenses, IR illuminators, battery technology, and recording devices in the industry. “The philosophy at Digital FOV is to integrate the best technologies in the industry, not try to build them”, said Henry Johns, Chief Technology Innovator at Digital FOV, LLC. This design feature also enables Digital Crosshairs 1000s, that are purchased today to be upgraded by the company as the technology improves.

Digital FOV is a leader in the manufacture of affordable yet effective night vision clip-on devices that turn any standard day scope into a digital low light & night vision scope.
https://www.digitalcrosshairs.net
https://www.digitalcrosshairs.com

Media Contacts:
Henry Johns
Digital FOV, LLC
(404) 590-6513
https://www.digitalcrosshairs.net

New Digital Crosshairs 1000R Night Vision Clip-on with built in DVR

Digital FOV, LLC just release a new version of Digital Crosshairs 1000 IR night vision clip-on that includes a built in DVR recorder that also plays back right on the rail mounted display.  It is the only night vision clip-on that lets you take the night vision shot and then play it back right on the rail mounted display.

Priced at just $750 but compare to units that cost thousands more.

www.digitalcrosshairs.net or call 404-590-6513

Digital Crosshairs 1000R

Digital Crosshairs 1000 DVRPro

Learn more at www.digitalcrosshairs.net or call 404-590-5613

microphone for recording sound

This system has a built-in microphone for recording the sound of your hunt as well as video. Now your friends can see and hear the shot.

FAQ Digital Crosshairs 1000 Night Vision

FAQ

Recently we got some good questions from a prospective customer in South Carolina regarding Digital Crosshairs 1000 night vision clip-on that we felt are worth sharing.

  1. Will it work on my Nikon Buckmaster 2 scope that is 4x12x40 for all the zoom ranges?

Answer:  1

I should work fine with your Buckmaster.   It will work on the low magnification of 4 – 5.  It may work with the higher magnifications but it probably will not.  On some scopes brands it does, some it does not

It will adjust for all magnifications on scopes that have AO (adjustable objective).

When using night vision on your scope, un-like in the day light when you can scan with your eyes and then target in with the scope, the only thing you are going to see is your scope’s field of view at night.  The higher the magnification, the narrower your field of view.  You will probably want to use the lowest magnification to get the widest field of view.

  1. We are concerned that the LCD screen will light us our faces and make then visible to deer when we are in our stands. Is this a problem? Can the screen be located below the gun to hide the light from view better? Is the cable long enough to move it down below gun while siting in a tower stand?

Answer : 2

The screen is easily adjustable for brightness and contract, you can dim it.  We also ship a red screen protector with your kit which some hunter like to use to turn the glow from white light to red light.   Also, your face will be about an arm’s length from the display when mounted on your gun.

The screen is held in our proprietary mount by a thumb screw that you can loosen to detach the screen.  It has 16” of cable in the wiring/battery pouch designed to allow you to locate the screen away from your gun.  We can also sell you an extension or you can purchase a standard 4 pole extension cable.

  1. How long does the battery last? How long to recharge battery?

Anwer: 3

The battery will last about 6 hours on a full charge.  It takes 5 to 6 hours to charge.  The battery is removable so you can purchase spare batteries from us for just $40.  It is a re-chargeable lithium battery and we provide a charger for it.

The illuminator runs on one 18650 lithium battery.  We provide two with the kit and the charger.  These batteries will run about two hours.   You can purchase them on the internet for $3 to $20 each.  The better ones will run up to 5 hour on a charge I am told by some customers.  You can also add a pressure switch to your illuminator so it is not on all the time.   Another note from experience, if it is below 40 degrees out, keep your batteries in your pocket to stay warm.  I was in a stand one night for hours and it was 28 degrees out with my batteries on the floor.  Guess what happened, they all went dead.

  1. Can we get an extended warranty past 1 year?

I can give you an extended 2 year warranty on the illuminator, LCD,  camera clip-on and wiring harness.  We do not give a warranty on the batteries because people can miss-manage them.  The LCD, like your phone, is not warrantied for water damage or abuse.    A replacement battery is $40 and a replacement screen is $50 for customers.  Our goal is not to make money on repairs, it is to keep you in the woods hunting!

 

  1. Can we get a discount for buying say 4 or 5 at once?

Answer: 5

Yes.  $550 each

 

  1. How long does it take to mount the system on a rifle? We are thinking about taking it with us and mounting it in the field as it gets dark.

Answer: 6

Once you attach the picatinny rail adapter to your scope, it takes less than 60 seconds,  really.

What I would do is mount the battery pouch to the scope or stock of your gun ahead of time.  This attaches with Velcro and that sound you may not want to chance deer hearing.

When it gets dark, attach the clip-on to the eye piece and mount the screen and illuminator, then just plug them in.

7.  Can you get extra batteries

Yes, the battery just slips into the power pouch.  You can disconnect it and replace it with a fresh battery at any time.

8.  Can I use this system during the day?

Yes this system can be used day or night.  It switches to night vision automatically and sun light does not bother it at all.  The night vision is black and white.  Day vision with the DC1000 works well however the colors are not realistic.  With our Sony based system you get excelent color during the day and black and white night vision.

See us on Facebook

Learn more at http://www.digitalcrosshairs.net

IR Digital Night Vision

Night vision technology is going digital fast.  Look at all the major vendors and they all have a digital product offering.  IR (infrared red) digital night vision uses a circuit board camera that is very sensitive to visible and IR light.   This alone is why prices are falling and once you go digital IR, you will never go back.

This technology is in an early growth state and is making advances in light sensitivity and power every few months.  In our opinion digital devices are equal in quality to Gen2+ at a fraction of the cost.  The new starlight cameras are coming and will one day be a standard which is hundreds of times more sensitive to light than typical consumer market IRs.

insertpic_ecc6

IR digital night vision camera boards use the infared light band waves that are invisible to human and animal eyes.  But IR sensitive night vision camera technology can also utilize visible light band waves as well.

For example, IR night vision scopes can see around a distant area at night taking advantage of an outside light that is on.  You can point it at an area with a bright street light with no damage, in fact your view is improved. This is something that you may not think is important until you are out hunting in a situation where you want to look into shadows around lighted area.  Can’t do that with a traditional I2 (intensifier tube) night vision device which will either be damaged by bright lights or shut off leaving you with no visibility at all.

The Digital Crosshairs 1000 night vision clip-on has a 4.3 inch rail mounted monitor that makes it easy to scan dark field or wooded areas without any eye blindness that results from peeking through a bright night vision scope eye piece in the dark.  Your eye can’t adjust quickly back to night vision after looking into the bright scope’s viewer.  This makes it possible to comfortably hunt for hours with virtually no eye strain or night blindness.

Digital Crosshairs 1000 night vision clip-on parts
Digital Crosshairs 1000 night vision clip-on parts

Just like phones and automobiles, everything will have a display sooner or later.  Why not a rifle scope?